Shower Sets & Shower Heads

0 designs · each in 6 finishes

    BEFORE YOU BUY

    How to choose a shower set

    What you need on the wall, and what each shower needs from the room.

    Mixer first

    Every head and rail needs a wall mixer to turn it on and set the temperature. For two outlets from one mixer, use the Cannes diverter mixer.

    Ceiling or wall arm

    The Lyon drops 200 mm from the ceiling. The Bordeaux reaches 384 mm from the wall. Both have a 250 mm head.

    Twin rail set

    The Corsica rail set is 930 mm tall with a 400 mm arm, and pairs an overhead head with a hand shower on one rail.

    Flow

    Heads and rail are WELS 3 Star at 8.0 L/min; the Versailles hand shower is 3 Star at 8.5 L/min. All are rated 50 to 800 kPa.

    Choosing a showerLow-pressure hot waterTapware finishes explainedBathroom order of trades

    Shower questions

    Is there a handheld shower combo with an overhead head?

    Yes, two ways. The Corsica twin rail set has both on one rail with a built-in diverter, or pair a Lyon or Bordeaux head with the Versailles hand shower and the Cannes diverter mixer.

    Which wall shower mixer do I need?

    A single wall mixer runs one outlet. The Cannes wall shower mixer adds a diverter, so one lever runs two outlets, such as an overhead head and a hand shower.

    Do rain shower heads have good pressure?

    Ours are rated for 50 to 800 kPa and flow at 8.0 L/min (WELS 3 Star). A 250 mm face spreads that flow wider than a small head, so the spray feels gentler at the same flow.

    Will it fit a low ceiling?

    Check the outlet position first: the Lyon drops 200 mm from the ceiling, the Bordeaux reaches 384 mm from the wall and the Corsica rail is 930 mm tall. If you're unsure, send us a photo with the measurements.

    Are all shower arms universal?

    Ours connect with a ½″ BSP fitting, the Lyon to a ceiling outlet and the Bordeaux to a wall outlet. Check which outlet you have before you order.

    Rain shower heads, twin showers and the mixers that run them

    A rain shower here means a 250 mm head overhead, and we make it two ways: hanging from the ceiling or reaching out from the wall. With the twin rail set, a hand shower and a diverter mixer that makes five designs, each in six finishes, all with brass and 304 stainless steel bodies and WaterMark licence WM-022555 to AS/NZS 3662.

    Bathroom shower set or separate parts?

    Every head needs a wall mixer to turn it on and set the temperature; none is self-contained. For one outlet, a single wall mixer such as the Milano runs it. For two outlets from one lever, the Cannes combines the mixer with a diverter; its valve needs 55 to 85 mm of depth in the wall, so it goes in at rough-in.

    Ceiling shower arm: the Lyon

    The Lyon drops 200 mm from the ceiling on a ½″ BSP ceiling fitting, so the Ø250 mm head falls straight down. If your outlet is close to the ceiling, send us a photo with the measurements and we'll tell you which arm fits.

    Wall arm: the Bordeaux

    The Bordeaux carries the same 250 mm head on a curved arm that reaches 384 mm from a ½″ BSP wall fitting, which puts the head well out into the shower. Both heads are rated WELS 3 Star at 8.0 L/min.

    Twin shower on a rail: the Corsica

    The Corsica puts an overhead head and a hand shower on one Ø25 mm rail, 930 mm tall, with a 400 mm arm holding the head 328 mm off the rail. A diverter on the rail switches between the two, so one wall mixer runs both.

    Dual shower with a separate hand shower

    For a dual shower without a rail, pair the Lyon or Bordeaux with the Versailles hand shower, 200 mm long on a Ø55 mm wall outlet and rated 3 Star at 8.5 L/min, and run both from the Cannes. Choosing a shower compares rails, wall arms and ceiling arms.

    All five work from 50 to 800 kPa and are installed by a licensed plumber. Match the floor waste and screen hinges in the same finish.

    Every product here has the same cover: 15 years on the body, 7 years on cartridges, valves and moving parts, 3 years on the finish and 2 years on washers, seals and O-rings (tapware warranty). Taps and showers must be installed by a licensed plumber for the warranty to apply.