Gold bathroom tapware with a brushed finish
Brushed brass is our gold bathroom tapware finish, the look many people call brushed gold: a soft, lighter gold with a fine brushed grain rather than a mirror polish. It's brighter and more contemporary than our antique brass, and it lifts white or pale tiles. All 24 of our designs are made in it.
Brass shower rail set
The Corsica is a brass shower rail set: a 930 mm, Ø25 mm rail carrying an overhead head on a 400 mm arm and a hand shower, with a diverter between them. The body is brass and 304 stainless steel, it works from 50 to 800 kPa, and it's rated WELS 3 Star at 8.0 L/min.
Brushed gold shower set from separate parts
For a brushed gold shower set without a rail, combine the Lyon ceiling head (200 mm drop) or the Bordeaux wall arm (384 mm reach) with the Versailles hand shower, and run both from the Cannes diverter mixer.
Brushed brass basin mixer and wall taps
The Vienna Tall brushed brass basin mixer stands 305 mm for a basin on top of the bench, and the Vienna Short 175 mm for a basin set into it. The Milano wall mixer and its spout set put the tap on the wall instead, and all four are Lead Free WaterMark certified. At the sink, the Como and Porto come in brushed brass too.
Brushed brass toilet roll holder and accessories
The Lille brushed brass toilet roll holder is 165 mm long and sits 65 mm off the wall. With the Provence 600 mm towel rail and the Copenhagen robe hook it makes a set in 304 stainless steel, and the Santorini lever and Prague lock carry the gold to the door.
Looking after brushed brass
Look after it and brushed brass keeps its colour. Use warm soapy water and a soft cloth, dry it, and keep acid, chlorine and abrasive cleaners away (finish care guide). Antique brass vs brushed brass shows our two golds side by side. The Granada floor waste and Firenze bottle trap carry the same gold below the basin and underfoot.
Every product here has the same cover: 15 years on the body, 7 years on cartridges, valves and moving parts, 3 years on the finish and 2 years on washers, seals and O-rings (tapware warranty). Taps and showers must be installed by a licensed plumber for the warranty to apply.



















