Basin mixer taps in two heights, or off the bench altogether
Choosing a basin mixer comes down to one measurement: the gap between the basin rim and the underside of the spout, which should be at least 50 mm. Our four designs cover the usual set-ups, each in six finishes, and all four are Lead Free WaterMark certified, with no more than 0.25% weighted average lead in the parts that touch drinking water.
Tall basin mixer for above-bench basins
The Vienna Tall stands 305 mm with 200 mm of clearance under the spout and 180 mm of reach, so it clears an above-counter basin with a rim up to about 150 mm. It's the one for a vessel basin sitting on top of the vanity.
The Vienna Short is 175 mm tall with 75 mm under the spout and 140 mm of reach, for a basin set into the bench or only slightly raised. Both fit a single Ø35–38 mm tap hole and are rated WELS 5 Star at 6.0 L/min. Which tap fits my basin? picks the height from your basin's measurements.
Wall mount basin taps: the Milano wall mixer
Wall-mounted taps keep the vanity top clear, which helps on a narrow bench or with a basin that has no tap hole. The Milano wall mixer has a Ø65 mm wall plate and a 115 mm lever, and its in-wall body needs 45 to 70 mm of depth. It goes in before the wall is sheeted and tiled, so plan it at rough-in; bathroom heights and rough-in measurements covers where it sits.
Wall spout and mixer set
The Milano spout and mixer set pairs that mixer with a basin spout projecting 192 mm from the wall. It's rated WELS 5 Star at 6.0 L/min and needs the same 45–70 mm of wall depth. Because the spout comes out of the wall, the height of the basin doesn't limit it the way it limits a bench-mounted tap. Wall-mounted or bench-mounted? sets the two side by side.
Inside every mixer
All four have DZR brass bodies, Citec ceramic cartridges and WaterMark licence WM-022467 to AS 3718, and work from 50 to 800 kPa. We supply replacement cartridges. The in-wall body of each wall model is shared across its six finishes, so a later change of finish is a trim swap rather than a retile (what you can swap without retiling). A pop-up waste or bottle trap in the same finish completes the basin.
Every product here has the same cover: 15 years on the body, 7 years on cartridges, valves and moving parts, 3 years on the finish and 2 years on washers, seals and O-rings (tapware warranty). Taps and showers must be installed by a licensed plumber for the warranty to apply.